H3C WA6126 Access Point, Internal Omni-directional antenna, 6 Streams Dual Radio, Wi-Fi 6, 802.3at/af POE, Fit AP Mode, Smart O&M, Roaming Optimization, Flexible Forwarding, White | EWP-WA6126
- The AP adopts a dual-band and six-stream design with a maximum access rate of 5.375 Gbps.
- For 5 GHz radio 4 spatial streams, the maximum negotiation rate is 4.8 Gbps.
- For 2.4 GHz radio 2 spatial streams, the maximum negotiation rate is 0.575 Gbps.
- It meets the high bandwidth and high concurrency requirements of common high-density indoor scenarios.
- The installation of H3C WA6126 wireless AP is flexible, with panel mounting, wall mounting, and ceiling mounting available.
- The dual network port design enables link aggregation and internal and external network isolation
-
Wireless intrusion prevention system (WIPS)
WA6126 supports WIPS. In combination with the wireless controller/wireless switch, it supports WIPS features such as detection, intrusion detection, as well as blacklist and whitelist of rogue devices at the same time. The WIPS features enable the device to detect, identify, take countermeasures against, and effectively intercept rogue devices.
Wired network security
WA6126 supports wired access and control of APs. The wireless port of APs can be authenticated as an 802.1X client of the wired access network to ensure the legality of the AP. It guarantees the security of the wireless tunnel through encryption methods such as CAPWAP tunnel and DTLS.
Radio resource optimization and station access control policy
WA6126 supports the radio resource optimization policy (RROP). RROP is a collection of multiple wireless radio optimization methods. It is used to reduce or control the consumption of radio media resources caused by management packets, broadcast packets, and invalid packets. It helps to set aside more resources to provide the users with better wireless application services. RROP mainly contains radio resource optimization policies such as layer 2 isolation for wireless services, disabling low data rate, adjusting the Beacon interval, and disabling the broadcast probe function.
WA6126 supports the station access control policy (SACP), which guides the terminal client to access the optimal AP or wireless service and helps control and schedule the traffic of the terminal devices based on network applications. This improves the overall performance of the entire wireless network and improves the experience and effect of wireless access applications. SACP feature mainly includes terminal control policies such as the prohibition of clients with weak signals, spectrum guide, roaming guide, load sharing, ignorance of packets with weak signals, fair scheduling of radios, traffic shaping based on client link status, and smart bandwidth guarantee.
Specifications
Name WA6126 Dimensions (H x W x D) 35 x 185 x 155 mm Ethernet Interface 1 × 100/1000M/2.5G electrical port
1 × 100/1000M electrical portPoE 2.5GE: 802.3at/af Local Power Supply 54V DC Console Port 1 USB Port 1 Built-in Antenna Internal Omni-directional antenna
4dBi antenna gain @2.4GHz
4dBi antenna gain @5GHzWorking Frequencies 802.11ax/ac/n/a: 5.725 GHz - 5.850 GHz
5.47 GHz - 5.725 GHz
5.15 GHz - 5.35 GHz802.11ax/b/g/n 2.4 GHz - 2.483 GHz Modulation Technology OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps
MIMO-OFDM(11n): MCS 0-31
MIMO-OFDM(11ac): MCS 0-9
MIMO-OFDM(11ax): MCS 0-11Modulation Mode 11b: DSS @5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
11n: MIMO-OFDM, QPSK, 16QAM, 64QAM
11ac/ac wave2: MIMO-OFDM, QPSK, 16QAM, 64QAM, 256QAM
11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAMTransmit Power (Combined Power) 20 dBm (Varies depending on local laws and regulations) Adjustable Power Granularity 1 dBm Reset/Restoration to Factory Default Supported State LED Yellow/green/blue Operating Temperature -10ºC to +55ºC Storage Temperature -40ºC to +70ºC Operating Humidity 5% - 95% (non-condensing) Storage Humidity 5% - 95% (non-condensing) Power Consumption ≤ 17.6 W (without USB feature)
≤ 35.1 W (with USB feature)Safety Compliance GB 4943, EN/IEC/UL 60950-1, EN/IEC/UL 62368-1 EMC EN 55024, EN 55032, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 60601-1-2, EN 301 489-1, EN 301 489-17 Environment GB/T 2423, GB/T 13543, GB 4208 Radio Frequency Certification FCC Part 15, EN 300 328, EN 301 893, MIIT SRRC MTBF 542776H
- The AP adopts a dual-band and six-stream design with a maximum access rate of 5.375 Gbps.
- For 5 GHz radio 4 spatial streams, the maximum negotiation rate is 4.8 Gbps.
- For 2.4 GHz radio 2 spatial streams, the maximum negotiation rate is 0.575 Gbps.
- It meets the high bandwidth and high concurrency requirements of common high-density indoor scenarios.
- The installation of H3C WA6126 wireless AP is flexible, with panel mounting, wall mounting, and ceiling mounting available.
- The dual network port design enables link aggregation and internal and external network isolation
-
Wireless intrusion prevention system (WIPS)
WA6126 supports WIPS. In combination with the wireless controller/wireless switch, it supports WIPS features such as detection, intrusion detection, as well as blacklist and whitelist of rogue devices at the same time. The WIPS features enable the device to detect, identify, take countermeasures against, and effectively intercept rogue devices.
Wired network security
WA6126 supports wired access and control of APs. The wireless port of APs can be authenticated as an 802.1X client of the wired access network to ensure the legality of the AP. It guarantees the security of the wireless tunnel through encryption methods such as CAPWAP tunnel and DTLS.
Radio resource optimization and station access control policy
WA6126 supports the radio resource optimization policy (RROP). RROP is a collection of multiple wireless radio optimization methods. It is used to reduce or control the consumption of radio media resources caused by management packets, broadcast packets, and invalid packets. It helps to set aside more resources to provide the users with better wireless application services. RROP mainly contains radio resource optimization policies such as layer 2 isolation for wireless services, disabling low data rate, adjusting the Beacon interval, and disabling the broadcast probe function.
WA6126 supports the station access control policy (SACP), which guides the terminal client to access the optimal AP or wireless service and helps control and schedule the traffic of the terminal devices based on network applications. This improves the overall performance of the entire wireless network and improves the experience and effect of wireless access applications. SACP feature mainly includes terminal control policies such as the prohibition of clients with weak signals, spectrum guide, roaming guide, load sharing, ignorance of packets with weak signals, fair scheduling of radios, traffic shaping based on client link status, and smart bandwidth guarantee.
Specifications
Name WA6126 Dimensions (H x W x D) 35 x 185 x 155 mm Ethernet Interface 1 × 100/1000M/2.5G electrical port
1 × 100/1000M electrical portPoE 2.5GE: 802.3at/af Local Power Supply 54V DC Console Port 1 USB Port 1 Built-in Antenna Internal Omni-directional antenna
4dBi antenna gain @2.4GHz
4dBi antenna gain @5GHzWorking Frequencies 802.11ax/ac/n/a: 5.725 GHz - 5.850 GHz
5.47 GHz - 5.725 GHz
5.15 GHz - 5.35 GHz802.11ax/b/g/n 2.4 GHz - 2.483 GHz Modulation Technology OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps
MIMO-OFDM(11n): MCS 0-31
MIMO-OFDM(11ac): MCS 0-9
MIMO-OFDM(11ax): MCS 0-11Modulation Mode 11b: DSS @5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
11n: MIMO-OFDM, QPSK, 16QAM, 64QAM
11ac/ac wave2: MIMO-OFDM, QPSK, 16QAM, 64QAM, 256QAM
11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAMTransmit Power (Combined Power) 20 dBm (Varies depending on local laws and regulations) Adjustable Power Granularity 1 dBm Reset/Restoration to Factory Default Supported State LED Yellow/green/blue Operating Temperature -10ºC to +55ºC Storage Temperature -40ºC to +70ºC Operating Humidity 5% - 95% (non-condensing) Storage Humidity 5% - 95% (non-condensing) Power Consumption ≤ 17.6 W (without USB feature)
≤ 35.1 W (with USB feature)Safety Compliance GB 4943, EN/IEC/UL 60950-1, EN/IEC/UL 62368-1 EMC EN 55024, EN 55032, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 60601-1-2, EN 301 489-1, EN 301 489-17 Environment GB/T 2423, GB/T 13543, GB 4208 Radio Frequency Certification FCC Part 15, EN 300 328, EN 301 893, MIIT SRRC MTBF 542776H
- The AP adopts a dual-band and six-stream design with a maximum access rate of 5.375 Gbps.
- For 5 GHz radio 4 spatial streams, the maximum negotiation rate is 4.8 Gbps.
- For 2.4 GHz radio 2 spatial streams, the maximum negotiation rate is 0.575 Gbps.
- It meets the high bandwidth and high concurrency requirements of common high-density indoor scenarios.
- The installation of H3C WA6126 wireless AP is flexible, with panel mounting, wall mounting, and ceiling mounting available.
- The dual network port design enables link aggregation and internal and external network isolation
-
Wireless intrusion prevention system (WIPS)
WA6126 supports WIPS. In combination with the wireless controller/wireless switch, it supports WIPS features such as detection, intrusion detection, as well as blacklist and whitelist of rogue devices at the same time. The WIPS features enable the device to detect, identify, take countermeasures against, and effectively intercept rogue devices.
Wired network security
WA6126 supports wired access and control of APs. The wireless port of APs can be authenticated as an 802.1X client of the wired access network to ensure the legality of the AP. It guarantees the security of the wireless tunnel through encryption methods such as CAPWAP tunnel and DTLS.
Radio resource optimization and station access control policy
WA6126 supports the radio resource optimization policy (RROP). RROP is a collection of multiple wireless radio optimization methods. It is used to reduce or control the consumption of radio media resources caused by management packets, broadcast packets, and invalid packets. It helps to set aside more resources to provide the users with better wireless application services. RROP mainly contains radio resource optimization policies such as layer 2 isolation for wireless services, disabling low data rate, adjusting the Beacon interval, and disabling the broadcast probe function.
WA6126 supports the station access control policy (SACP), which guides the terminal client to access the optimal AP or wireless service and helps control and schedule the traffic of the terminal devices based on network applications. This improves the overall performance of the entire wireless network and improves the experience and effect of wireless access applications. SACP feature mainly includes terminal control policies such as the prohibition of clients with weak signals, spectrum guide, roaming guide, load sharing, ignorance of packets with weak signals, fair scheduling of radios, traffic shaping based on client link status, and smart bandwidth guarantee.
Specifications
Name WA6126 Dimensions (H x W x D) 35 x 185 x 155 mm Ethernet Interface 1 × 100/1000M/2.5G electrical port
1 × 100/1000M electrical portPoE 2.5GE: 802.3at/af Local Power Supply 54V DC Console Port 1 USB Port 1 Built-in Antenna Internal Omni-directional antenna
4dBi antenna gain @2.4GHz
4dBi antenna gain @5GHzWorking Frequencies 802.11ax/ac/n/a: 5.725 GHz - 5.850 GHz
5.47 GHz - 5.725 GHz
5.15 GHz - 5.35 GHz802.11ax/b/g/n 2.4 GHz - 2.483 GHz Modulation Technology OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps
MIMO-OFDM(11n): MCS 0-31
MIMO-OFDM(11ac): MCS 0-9
MIMO-OFDM(11ax): MCS 0-11Modulation Mode 11b: DSS @5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
11n: MIMO-OFDM , QPSK, 16QAM, 64QAM
11ac/ac wave2: MIMO-OFDM , QPSK, 16QAM, 64QAM, 256QAM
11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAMTransmit Power (Combined Power) 20 dBm (Varies depending on local laws and regulations) Adjustable Power Granularity 1 dBm Reset/Restoration to Factory Default Supported State LED Yellow/green/blue Operating Temperature -10ºC to +55ºC Storage Temperature -40ºC to +70ºC Operating Humidity 5% - 95% (non-condensing) Storage Humidity 5% - 95% (non-condensing) Power Consumption ≤ 17.6 W (without USB feature)
≤ 35.1 W (with USB feature)Safety Compliance GB 4943, EN/IEC/UL 60950-1, EN/IEC/UL 62368-1 EMC EN 55024, EN 55032, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 60601-1-2, EN 301 489-1, EN 301 489-17 Environment GB/T 2423, GB/T 13543, GB 4208 Radio Frequency Certification FCC Part 15, EN 300 328, EN 301 893, MIIT SRRC MTBF 542776H
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange other than Replace Warranty
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at sales.ebuyuae@gmail.com.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at sales.ebuyuae@gmail.com and send your item to: Abdul Aziz Building,
21a Street, Bur Dubai, Dubai, United Arab Emirates.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
To return your product, you should mail your product to: Abdul Aziz Building,
21a Street, Bur Dubai, Dubai, United Arab Emirates
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over 500 AED, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
